ORIGIN CAD/CAM Home
 
CAM Software
ORIGIN CAM Software
Sintering Oven
DuoTron Pro
ORIGIN ProTherm
Suction
ULT Suction
Consumables
Consumables

Cobalt-Chromium (CoCr) is a Non-precious, Low-cost Alternative to Create Individual Crowns and Multi-tooth Bridges

  • Highly biocompatible (Nickel free)
  • Highly resistant to corrosion and heat
  • 10 micron knife edge margin right off the machine
  • No more metal casting problems -
    i.e. short margin, rocking, distortion, soldering, etc.
  • CE certified material - Made in Germany
  • Single crowns to 16-unit bridges
 
Name of Product: ORIGIN® Cobalt-Chromium
Description: EMF-Disc on Cobalt base
Measure: Ø 98,3 x 8 mm
Ø 98,3 x 10 mm
Ø 99,5 x 8 mm
Lot / Batch NO.: B90-43
Chemical Composition:
Co% Cr% W% Mn% Fe% Si% C%
61,0% 28,0% 8,5% 0,25% <0,5% 1,65% <0,1
Typical Technical Data:    
Density: 8,3 g/cm3
E-modul: 190.000 MPa ( N/mm-² )
Melting Point (Solidus/Liquidus): 1.390 - 1.415°C
CTE:
(Coefficient of Thermal Expansion, 10-6 • K-1)		 14,1 μm/K ( 20 - 600°C )
Extension: 10%  
Hardness: 285 HV 10  
Norm: DIN EN ISO 22674:2006, Type 4
  Production and examination according to
  DIN EN ISO 13485 / DIN EN ISO 9001:2008
  with appendix V MP-recommendation 93/42/EWG
B&D Dental
Tel: 800.255.2839 | 801.281.4012
email: support@origincadcam.com