ORIGIN CAD/CAM Home
 
CAM Software
ORIGIN CAM Software
Sintering Oven
DuoTron Pro
ORIGIN ProTherm
Suction
ULT Suction
Consumables
Consumables
  Download .pdf document

Zirconia is highly aesthetic
Zirconia is highly translucent especially when compared to traditional metal substructures and can be customized according to the 16 classic Vita shades. Zirconia restorations also solve the ‘black gum line’ problem inherent with traditional metal restorations which occurs when the gingiva recedes. These qualities of zirconia provide natural looking restorations which are indistinguishable from real teeth.

Zirconia is exceptionally strong
Often referred to as ‘white steel’, zirconia is just as strong if not stronger than metal restorations and has a high fracture resistance.

Zirconia is bio-compatible
The body accepts tissue friendly zirconia as a natural material which minimizes the potential for allergic reactions.

Zirconia is corrosion free
Zirconia does not corrode because it is “chemically inert”.

Zirconia has low thermal conductivity
Most metals have a high thermal conductivity causing patients to feel greater sensitivity to fluctuations of hot or cold in the mouth. Zirconia restorations have a low thermal conductivity which helps minimize this problem.
  • Strongest in Class (Documented 1,400 MPa)
  • Tested clinically safe for cytotoxicity
  • Far more chip resistant while finishing the sintered copings
  • Excellent Translucency
  • Excellent aesthetics and 100% biocompatibility
  • High degree of clinical safety
  • Engineered with bar codes for full control of consistent sintering shrinkage
  • Conventional cementation
  • Excellent marginal accuracy
  • European CE & U.S. IdentCeram® certified

ORIGIN - YZ Zirconia Disks
We have a solid and proven expertise regarding the relationship between blank density, the milling enlargement factor and the sintering shrinkage rate that lead to the consistency of the prosthesis from single copings to large bridge framework.

From this high-quality, yttrium stabilized zirconium oxide material you can make bridge frames up to 16 units or customized implant abutments.

ORIGIN YZ zirconia is biocompatible and particularly resistant to ageing. This material differs from conventional zirconium oxides in that it is extremely homogeneous. This is achieved by means of an advanced manufacturing process and results in an excellent fit, even for large bridgework.

Once you’ve choosen ORIGIN, you’ll benefit from high quality zirconia at the most affordable material prices in the industry.
98 X 10 mm | 98 X 12 mm | 98 X 14 mm | 98 X 18 mm | 98 X 20 mm
  FDA (510K) Registered
10 Year Warranty
IdentCeram Certified
FREE Round-trip Shipping		 Flexural Strength 1,400 MPa
Flexural Toughness (KIC) of 7.0
One Day In-lab Service
Translucency		  

ORIGIN - YZ Zirconia Cube Blocks
Designed for use with Sirona's and MC XL machines, ORIGIN YZ zirconia milling blocks are used as a milled substructure using CAD/CAM technology both for veneering and the press-on technique. ORIGIN YZ zirconia is formulated using a small grain size (< 0.3μm) to reduce porosity and undergoes an advanced manufacturing process to ensure uniform density, no warping during the sintering process, and quality control for large ceramic blanks. The yttrium-stabilized high quality zirconium oxide blocks display exceptional physical properties including a flexural strength of 1100 MPa.

Tested and Proven to Be Superior for Various Milling Tools and Methods with No Margin Chipping
Margin chipping can occur for many reasons including; incorrect calibration, tool wear, a margin design that is too weak, etc. In addition, weak zirconia material may not withstand the stress of the aggresive milling process, possibly leaving small visible chips along the margin as well as unvisible micro-cracks within the coping or framework.

ORIGIN YZ zirconia discs have been tested successfully for different milling tools including both conventional designs (tool B & C) and advanced burs (tool A) designed to cut faster and more agressively. It also can be milled under both wet milling and dry milling conditions.

Excellent Esthetic Properties - A Translucent Substructure That is Comparable to or Better Than Leading Brands
An identical coping was milled with the Cerec machine using three of the major brands. The translucency of the material depends not only on the material properties of the ceramic, but also on the recommended thickness of the layer, i.e. the wall thickness. So we followed the minimum wall thickness requirement (0.7mm) of the inLab system for all three copings with the same design.
Whiteness After Sintering
The coping on the left looks just slightly yellow, where as Origin and leading brand B on the right appear to be nearly identical. It is hard to find a substantial visual difference even to a discerning technician.
Lightness Translucency
The coping on the left permitted a slightly less amount of light which was provided beneath the white paper. Origin and leading brand B seem to be almost the same to the eyes of most dental technicians.
ORIGIN - YZ Zirconia Blocks and Disks are Engineered to be Used for the Following Milling Systems
  • Cerec® inLab®
  • Wieland Zeno®Tec
  • KaVo Everest®
  • AmannGirrbach Ceramill
  • ORIGIN zirconia can be colored by dipping the coping into the Color Liquids prior to sintering.
  • ORIGIN YZ zirconia blocks can be colored according to the 16 different colors covering the entire classic-V shade range.
  • The color becomes indelible through the sintering process thus avoiding the possibility of having white margins.
  • After dipping, the excess liquid is removed by blow drying.
  • Coloring liquid has no negative effects on the physical material properties such as flexural strength or fracture toughness.